EN 
FR 
DE 
EOBD-FACILE COMPATIBLE ELM327 & OBD2
You already have an ELM327 interface ?
To make the diagnostic of your car,
Choose your software below to connect to your car and make a car diagnostics
Basic Edition
24 reviews
The Basic Edition will alow you to read the essential information of car engine diagnostics.
MAIN FEATURES
- Read fault codes
- Erase fault codes
- Switch off the MIL
- 4 curves Reading
- Save history
- Print record
All the features
39.90 €
MAIN FEATURES
- Read fault codes
- Erase fault codes
- Switch off the MIL
- 6 curves Reading
- Save history
- Print record
All the features
59.90 €
EOBD-Facile Features
| Basic | Plus | |
|---|---|---|
| Compatibility | ||
| Diesel, gasoline, GPL and Hybrid engine |  |
|
| Connecting to ELM327 interfaces (USB, Bluetooth and WiFi) | |
|
| Connecting to Engine computer (ECM), Diesel (2004), Gasoline(2001) | |
|
| Connecting to Transmission computer (TCM) | |
|
| Connecting to GPL (since 2007) | |
|
| Fault codes diagnostic | ||
| Reading of OBD2 fault codes (Mode 3) | |
|
| Reading of unconfirmed OBD fault codes (Mode 7) | |
|
| Decoding of OBD fault codes into text More than 11 000 definitions (P0xxx, P1xxx, B0xxx, C0xxx and U0xxx) |
|
|
| Clearing of OBD fault codes (Mode 4) | |
|
| Switch OFF malfunction indicator light (MIL) | |
|
| Reading of permanent OBD fault codes (Mode 10) | |
|
| Instantaneous data reading (Mode 2) | |
|
| Saving and reading of OBD fault codes |  |
|
| Printing of customised reports | |
|
| Recording of customised reports | |
|
| Check the consistency of vehicle sensor's values | |
|
| Monitoring | ||
| Reading of sensors (Mode 1) | |
|
| Continuous recording to sensor values (in a .csv file) for export in a spreadsheet |
|
|
| Test of oxygen's sensors (Mode 5) | |
|
| Test of the systems (EGR, Catalyst) (Mode 6) | |
|
| Graphs | ||
| Continuous reading of sensor values (Mode 1) In the form of a graph |
|
|
| Review recordings in graph form | |
|
| Smart recording triggers | |
|
| Performance measurement (0-100 km/h) | |
|
| Calculation/conversion on registered sensors | |
|
| Extra | ||
| Location of OBD2 socket in vehicles | |
|
| Virtual dashboard | |
|
| Terminal for advanced commands | |
|
| CAN bus spy | |
|
| Vehicle info (Mode 9) | |
|
| Commercial use | |
|
| VIN decoder | |
|
| 39.90 € | 59.90 € | |
Customers reviews
Basic Edition
Mac OS 10.13.6 High Sierra
I am using EOBD-Facile on a test bench that I have constructed, as a self-teaching project. The EOBD-Facile application works fine, exactly as described.
The application connects via WiFi to an OBD2 Adaptor mounted on my test bench. A two channel digital oscilloscope monitors the CAN bus. All of the devices under test are powered from a 12V DC bench power supply.
So far I have tested a Bosch MED 9.5.10 ECU removed from a VW Golf 2006 2.0 FSI, and an ECU removed from a Ford Falcon FG Utility LPG (sold only in Australia).
My next project is to add an Arduino module as a CAN bus node and see if it will be recognised by EOBD-Facile.
I have made a YouTube video of my test bench.
I recomend it.
More reviews
FAQ
Car Diagnostic Software
EOBD-Facile Basic and Plus Edition is an electronic automobile diagnostic software that works with ELM327 interfaces. It is available in several languages (French, English, German, Danish, Spanish, etc.) .
Through the OBD plug on your vehicle, EOBD-Facile allows you to access diagnostic data such as recorded fault codes. The full version also enables you to cancel faults and switch off the indicator on the dashboard.
Our software works on all makes of vehicle (Renault, Peugeot, Citroën, Volkswagen, Fiat, Ford, Opel, BMW, Audi, etc..).